Rheological behavior of Pluronic/Pluronic diacrylate hydrogels used for bacteria encapsulation in engineered living materials.

Pluronic (Plu) hydrogels mixed with variable fractions of Pluronic diacrylate (PluDA) have become popular matrices to encapsulate bacteria and control their growth in engineered living materials. Here we study the rheological response of 30 wt% Plu/PluDA hydrogels with PluDA fraction between 0 and 1. We quantify the range of viscoelastic properties that can be covered in this system by varying in the PluDA fraction. We present stress relaxation and creep-recovery experiments and describe the variation of the critical yield strain/stress, relaxation and recovery parameters of Plu/PluDA hydrogels as function of the covalent crosslinking degree using the Burgers and Weilbull models. The analyzed hydrogels present two stress relaxations with different timescales which can be tuned with the covalent crosslinking degree. We expect this study to help users of Plu/PluDA hydrogels to estimate the mechanical properties of their systems, and to correlate them with the behaviour of bacteria in future Plu/PluDA devices of similar composition.

Raman and NMR spectroscopic and theoretical investigations of the cubic laves-phases REAl2 (RE = Sc, Y, La, Yb, Lu).

The cubic Laves-phase aluminides REAl2 with RE = Sc, Y, La, Yb and Lu were prepared from the elements by arc-melting or using refractory metal ampoules and induction heating. They all crystallize in the cubic crystal system with space group Fd3̄m and adopt the MgCu2 type structure. The title compounds were characterized by powder X-ray diffraction and spectroscopically investigated using Raman and 27Al and in the case of ScAl2 by 45Sc solid-state MAS NMR. In both, the Raman and NMR spectra, the aluminides exhibit only one signal due to the crystal structure. DFT calculations were used to calculate Bader charges illustrating the charge transfer in these compounds along with NMR parameters and densities of states. Finally, the bonding situation was assessed by means of ELF calculations rendering these compounds aluminides with positively charged REδ+ cations embedded in an [Al2]δ- polyanion.

Safe-by-Design part II: A strategy for balancing safety and functionality in the different stages of the innovation process.

Manufactured nanomaterials have the potential to impact an exceedingly wide number of industries and markets ranging from energy storage, electronic and optical devices, light-weight construction to innovative medical approaches for diagnostics and therapy. In order to foster the development of safer nanomaterial-containing products, two main aspects are of major interest: their functional performance as well as their safety towards human health and the environment. In this paper a first proposal for a strategy is presented to link the functionality of nanomaterials with safety aspects. This strategy first combines information on the functionality and safety early during the innovation process and onwards, and then identifies Safe-by-Design (SbD) actions that allow for optimisation of both aspects throughout the innovation process. The strategy encompasses suggestions for the type of information needed to balance functionality and safety to support decision making in the innovation process. The applicability of the strategy is illustrated using a literature-based case study on carbon nanotube-based transparent conductive films. This is a first attempt to identify information that can be used for balancing functionality and safety in a structured way during innovation processes.

A study of enhanced ion formation from metal-semiconductor complexes in atmospheric pressure laser desorption/ionization mass spectrometry.

The study of the key parameters impacted surface-assisted laser desorption/ionization-mass spectrometry is of broad interest. In previous studies, it has been shown that surface-assisted laser desorption/ionization-mass spectrometry is a complex process depending on multiple factors. In the presented study, we showed that neither porosity, light absorbance nor surface hydrophobicity alone influence the enhancement phenomena observed from the hybrid metal-semiconductor complexes versus individual targets, but small changes in the analyte attaching to the target significantly affect laser desorption ionization-efficiency. By means of Raman spectroscopy and scanning electron microscopy, it was revealed that the formation of an amorphous analyte layer after drying on a solid substrate was essential for the enhanced laser desorption ionization-signal observed from the hybrid metal-semiconductor targets, and the crystallization properties of the analyte appeared as a function of the substrate. Obtained results were used for the screening of regular and lactose-free milk samples through the hybrid metal-semiconductor target. Copyright © 2016 John Wiley & Sons, Ltd.

Nanocomposite cerium oxide polymer matching layers with adjustable acoustic impedance between 4 MRayl and 7 MRayl.

A new class of materials for ultrasonic matching layers is presented. The materials consist of nanoscale cerium oxide particles in an epoxy functionalized organic inorganic hybrid polymer matrix. The cerium oxide agglomerates to particles with 20 nm diameters. The content of particles in the polymer matrix could be increased to 75 wt.% which corresponds to 37 vol.%. The most technical important piezoelectrical ceramics have an acoustic impedance of about 30 MRayl, to improve coupling into water or biological tissue with an acoustic impedance of about 1.5 MRayl a matching layer should have an acoustic impedance of about 6.8 MRayl. With a filling degree of 75 wt.% the new composite material reaches an acoustic impedance of 7 MRayl. The materials are synthesized by a hydrolytic condensation combined with polymerization. This way of synthesis allows the use of organic solvents to adjust the viscosity of the sol and the application of different coating techniques. Ultrasound transducers (100 MHz) were built to test the new matching layers and an increase of the voltage signal amplitude of about 100% could be detected.